OpenClovis Product Documentation

Revision as of 18:07, 23 January 2013

1 Preface
2 Our Example: The csa101 System
3 Creating the csa101 Model
4 Generating the csa101 Code
5 Customizing the csa101 Code
6 Building the csa101 Code
7 Creating the csa101 Images
8 Deploying the csa101 Images
9 Running the csa101 Example
10 Summary and Next Steps
11 Appendix A: target.conf Settings
12 Appendix B: AMF Configuration Details

Preface

The SAFplus Platform Sample Application Tutorial is a comprehensive tutorial designed to highlight the steps involved in using SAFplus software to design and build a high availability system. In this tutorial you will learn to:

Design a model using the SAFplus IDE
Generate code from this model to provide middleware support
Customize this code for a particular application
Build and deploy the customized code
Run the system to see the SAFplus Platform software in action

Audience

SAFplus Platform Sample Application Tutorial is designed for system integrators, designers, and system architects. To use SAFplus Platform, you should be aware of the fundamentals of operation, management, and configuration of telecommunication and networking domains. You should also be familiar with C programming, UML notations, and have the basic knowledge of Linux.

This document assumes that you have installed the SAFplus Platform SDK, following the installation steps found in the SAFplus Platform Installation Guide.

Documentation Conventions

This guide uses different fonts and symbols to differentiate between document elements and types of information. These conventions are summarized in the following table.

Notation	Description
`Code`	This font denotes the C code provided in various examples. This font denotes function and variable names.
`Output`	Terminal output.
Cross reference	This font denotes a hyperlink. You can click on the hyperlink text to access the reference location, which can be either a section within the guide or a URL link. A cross reference refers to a section name and accesses the first page of that section.
`Filenames`, `<DIR>`	Files names, Directory paths.
`$ Commands group_identifier`	Commands to be run from a shell. Italic text indicate an argument. This can be replaced with your desired value.

This indicates the presence of notes or annotations, related to the context of the document.
This indicates that certain precautionary measures must be taken before performing a particular task.
This indicates that additional information is provided to you.

As mentioned in the SAFplus Platform Installation Guide the default directory for installation is /opt/clovis for root installation and $HOME/clovis for non root users. Throughout this document we will use <install_dir> to refer to the installation directory.

OpenClovis Online Technical Support

OpenClovis customers and partners can register on our Web site and receive personalized services and information. If you need any support or assistance while working on OpenClovis products, you can access the following: URL: http://www.openclovis.com. Send your queries to: support@openclovis.com. Open source community support is available at: http://www.openclovis.org/forum.

Documentation Feedback

We are interested in hearing from our customers on the documentation provided with the product. Let us know your comments and suggestions on improving the documentation at OpenClovis Inc. Send your comments to: support@openclovis.com. Or even better, edit (or comment in) the page on our documentation wiki located at http://help.openclovis.com.

Our Example: The csa101 System

The SAFplus Platform Sample Application Tutorial will take you through a series of examples each introducing a key concept of the product. Each example builds on the example before it so it is important to go through them in order. The examples are named so that it is easy to determine their sequence. The examples all begin with the letters csa (standing for Clovis Sample Application) and end with a number. Our first example will be csa101.

The purpose of our first example is to highlight basic component management. It introduces the basic skeleton of a SAFplus Platform based application component and illustrates how it interacts with the System. It demonstrates basic component registration and life-cycle management.

We will keep this first example very simple. It will consist of the SAFplus Platform running a small component named csa101. All that this component will do is continuously print 'Hello World!' to a log file. While this component is not very exciting, it will allow us to easily see when the application is in a running state and when it is not. This will allow us to focus on the infrastructure of SAFplus Platform and how the application interfaces with it.

For this example we will assume that we have a chassis with five slots. We will have one type of blade in our example, a System Controller.
With the type of model we are developing we would typically define two blade types to install in these slots. The first blade type would be a System Controller blade (which is responsible for running the SAFplus Platform software which manages application startup, shutdown, failover, etc.) and the second blade type would be a Payload blade (which is responsible for running our custom csa101 application). However, for the purpose of simplifying the deployment of our system, we will define only the System Controller blade type and have both the SAFplus Platform and component application run on this one blade. This will allow the example to be run on a single PC.

Creating the csa101 Model

The first step in setting up our example is to create a model which represents the system that we will eventually deploy. This is done through the SAFplus Platform IDE. In this chapter we will step through the following tasks:

Create a project area
Launch the SAFplus Platform IDE
Create the IDE project
Specify the Resource model (the types of physical hardware in our system)
Specify the Component model (the types of components or applications in our system)
Specify which Components run on which Resources
Specify important build and boot parameters

Creating a New Project Area

A project area is a directory on your system where you can develop SAFplus Platform models and generate the code corresponding to those models. The project area can hold multiple models allowing you to manage all of your models in one location. All the models in the same project area share the same SAFplus Platform source tree. This way any modifications made to the SAFplus Platform source tree are re-used across all the models that were created in that project area.

You create a project area using a script from the command line. To create a project area named projectarea1 in the /home/clovis directory you should execute the following command:

# cl-create-project-area /home/clovis/projectarea1

Launching the SAFplus Platform IDE

You can launch the SAFplus Platform IDE from the command line. If you chose to create symbolic links during installation you can simply enter cl-ide from any directory. If you did not create symbolic links during installation you can either:

Add the installation directory to the shells search path and then launch the IDE. For example with a bash shell, # export PATH=$PATH:$install_dir/sdk-5.0/bin # cl-ide
or
Execute the command # <install_dir>/sdk-5.0/bin/cl-ide

The splash screen for SAFplus Platform IDE is displayed as illustrated in Figure SAFplus Platform IDE Opening Screen.

SAFplus Platform IDE Opening Screen

You will then be prompted to select a workspace in which to do your work as illustrated in Figure SAFplus Platform IDE Workspace Launcher.

SAFplus Platform IDE Workspace Launcher

The workspace you select should correspond to the project area that you created in the previous section (in this case "/home/clovis/projectarea1"). Note that the workspace includes a subdirectory of "/ide_workspace". This is done strictly for organizational purposes. It keeps the IDE models separate from the generated SAFplus Platform models and code.

Select the workspace and click OK to launch SAFplus Platform IDE as illustrated in the Figure SAFplus Platform IDE Welcome Screen.

SAFplus Platform IDE Welcome Screen

The SAFplus Platform IDE is launched and you are now looking at the main work area. For more information about the components of this main work area including the SAFplus Platform IDE menu and toolbar, see SAFplus Platform IDE User Guide.

Creating the Sample Project

We will now create a project within the SAFplus Platform IDE. This project will hold both the resource model and the component model for our example system. The resource model is a physical view of the resources (the chassis, the blade types, etc.) in our system. The component model is a logical view of the components (applications, etc.) in our system.

We will be using the New Project Wizard to create our project. The wizard captures some high-level information about the system that we are building and performs a lot of the basic setup for us.

The same model that we are building through the wizard could also be created manually through the Resource and Component Editors. For more information on the Resource and Component Editors see SAFplus Platform IDE User Guide.

To launch the New Project Wizard select File > New > Project from the IDE menu bar.

The New Project Wizard is displayed and Clovis System Project is selected by default as illustrated in Figure New Project Wizard.

New Project Wizard

Click Next. The Clovis System Project window is displayed as illustrated in Figure Clovis System Project.

Clovis System Project

Enter the following information:

Project Name : Enter the name of your new project as SampleModel.
Do not use spaces or special characters for the project name. The project name can be alphanumeric, but cannot start with a number or have only numbers.
Select Use default to use the same directory mentioned in the Directory field.
SDK Location: Enter the location where the SAFplus Platform SDK was installed. For e.g. if the SDK was installed at location /opt/clovis, then the SDK location is /opt/clovis/sdk-<version>.
Project Area Location: Enter the location where the generated source code for the model should be stored.
This can be any existing directory but is usually the project area that was created in the previous section.
Python Location: Enter the location where Python 2.5.0 is installed on your system. If Python 2.5.0 was installed by SAFplus Platform SDK, the directory is <installation_directory>/buildtools/local/bin.

Click Next. The Add New Blade Type window is displayed. This dialog is used to define the blade types that are in our system.

Add New Blade Type

Remember that the system we are modelling has only one blade type...a System Controller.

Use the Add button to add a new blade type to the list. Name this blade type 'SysBlade' (for System Controller blade).

Click Next. The Add New SAF Node Type window is displayed. This dialog is used to define the type of logical node that will be run on the corresponding blade type defined in the previous dialog.

Add New SAF Node Type

Node types represent groups of software. They are classified as either a System Controller class or a Payload class. This distinction gives the node type certain characteristics which cause it to behave in a well-defined manner. Since we have only a System Controller in our system we will add a node type of class System Controller.

Use the Add button to add a new node type to the list. Name the node type 'SCNode' and ensure that its node class is 'System Controller (SAF Class B)'.

Click Next. The Specify Program Names window is displayed. This dialog is used to create programs or SAF Service Types and associate them with the SAF Node Types specified in the previous dialog.

Specify Program Names

In our system we need one SAF Service Type which represents our high availability software (csa101 that continously prints "Hello World!").

Use the Add button to add a program name to the list. Change the program name to 'csa101' and associate the program with the 'SCNode' node type.

Click Finish. This will create the sample model using the blade type, node type, and program name information collected through the 'New Project Wizard' dialogs.

Viewing the Model

The SAFplus Platform IDE Perspective

Once the wizard pages are closed you will be returned to the main IDE view also known as the SAFplus Platform IDE Perspective. On the left hand side of this view you will see the Clovis Workspace pane which contains the new project you just created with all project related files and folders. The folders are displayed based on your filter settings. With the default filter settings, the folders shown in Figure Clovis Workspace is displayed in the Clovis Workspace pane. For information about filter settings, refer SAFplus Platform IDE User Guide.

Clovis Workspace

By default, the Resource and Component Editor views are available for the created project. To view them, click Clovis on the menu bar at the top of the screen and select Resource Editor or Component Editor from the menu. You can also click Resource Editor or Component Editor icons from the tool bar as shown in Figure SAFplus Platform IDE Tool Bar.

SAFplus Platform IDE Tool Bar

Resource Editor View

The Resource Editor shows the types of physical objects in our system. It gives us a place to create new objects and interact with the objects that already exist. The Resource Editor view for our model should look similar to the following figure.

SAFplus Platform Resource Editor

This editor always has a Chassis object which is the root of all other objects in the editor. In our case it also has the SysBlade blade type that we created through the Project Creation Wizard. You will also notice that the SysBlade is attached to the Chassis using a Composition relationship indicating that SysBlades reside within the Chassis.

On the right hand side of the editor view you will see the Palette which can be expanded and collapsed. Expanding the Palette you will see the list of objects that can be dragged onto the editor view to add to our model. Once an object is on the editor view you can view and change its properties by right clicking on the object and selecting Properties... from the context menu.

For more information about the Resource Editor view see SAFplus Platform IDE User Guide.

Component Editor View

The Component Editor shows the types of logical objects in our system. It gives us a place to create new objects and interact with the objects that already exist. The Component Editor view for our model should look similar to the following figure.

SAFplus Platform Component Editor

This editor always has a Cluster object which is the root of all other objects in the editor. In our case it also has the SCNode node type and the csa101 SAF Service Type (a combination of Service Group, Service Unit, Service Instance, Component Service Instance, and SAF Component) that we created through the Project Creation Wizard. These have all been automatically attached in a way that makes a working model.

On the right hand side of the editor view you will see the Palette which can be expanded and collapsed. Expanding the Palette you will see the list of objects that can be dragged onto the editor view to add to our model. Once an object is on the editor view you can view and change its properties by right clicking on the object and selecting Properties... from the context menu.

For more information about the Component Editor view see SAFplus Platform IDE User Guide.

Configuring the Components

The New Project Wizard that we used to create our project configured the system using the most common options. We will have to make a few changes to this model in order for our example to work. We will make these changes in the Component Editor view.

In the Component Editor you will notice seven different objects that were created by the wizard. The first two of these are:

Cluster: The root object of all other objects in the Component Editor view.
SCNode: This is the SAF Node Type that we specified during project creation.

The next five objects all make up the Program or SAF Service Type that we specified on the last dialog of the New Project Wizard. These objects are:

csa101SG: This is the Service Group representing our high availability software component.
csa101SU: This is the Service Unit that is logically associated with the SCNode SAF Node Type.
csa101SI: This is the Service Instance
csa101CSI: This is the Component Service Instance
csa101: This is the SAF Component which represents our program or executable.

We will be making changes to the Service Group (csa101SG), the Service Instance (csa101SI), and the SAF Component (csa101).

Configuring the Service Group

To make changes to the Service Group double-click on the box titled csa101SG. The Service Group Details dialog is displayed.

Service Group Details

The first change we want to make is to the Redundancy Model. The Redundancy Model is the strategy that is used by the SAFplus Platform system to recover from a node failure. For our simple model (which only has one node) we are not going to rely on any failover recovery so change the Redundancy Model to 'No Redundancy' as shown.
You will notice that when you change the redundancy model some of the other fields are modified automatically and become read-only. This is to ensure integrity of the redundancy models.
The second change that we want to make is to the Admin State. The Admin State defines the state of the component when the system is first brought up. In our case we want to change the Admin State to be 'Locked Initialized'. This means that when the system first starts up this Service Group (and its subcomponents) will be initialized but not yet put into a running state. So our csa101 application will not yet start printing "Hello World!".
When you are finished making the changes click the OK button to commit the changes.

Configuring the Service Instance

To make changes to the Service Instance double-click on the box titled csa101SI. The Service Instance Details dialog is displayed.

Service Instance Details

The only change we want to make here is to the Number of standby assignments. This value represents the number of components that will be waiting to take over during a node failure and goes hand-in-hand with the Redundancy Model that we selected for the Service Group. Since we selected 'No Redundancy' for our Redundancy Model we need to set this value to 0...since we are not supporting any failover in this model.
When you are finished making the changes click the OK button to commit the changes.

Configuring the SAF Component

To make changes to the SAF Component double-click on the box titled csa101. The SAF Component Details dialog is displayed.

SAF Component Details

The SAF Component represents our high availabilty program or executable. We need to pass a command line argument to this executable. The reason for this argument is to force the program to print the 'Hello World!' output to a special log file for our viewing. We will look at this more closely when we customize our code.

To add command line parameters click the Edit... button corresponding to the Command line Arguments label.

The Command line Argument Details dialog is displayed.

Command line Argument Details

Click the New button to add a new value to the list.
Click on the new value in the list and it will become editable. Change the value to -p.
Click the OK button to save and close the dialog.
Click the OK button on the SAF Component Details dialog to commit the changes to the SAF Component and close the dialog.
Save the component model using the File > Save menu item.

Configuring Physical Instances

The configuration of our logical models is complete. During this process we have defined all of the 'types' of objects in our system. Now it is time to configure actual instances of those objects so that they can be built and deployed.

Object instance configuration is done through the Availability Management Framework (AMF) via the AMF Configuration dialog.

To launch this dialog go to the the Clovis menu and select AMF Configuration...

The AMF Configuration dialog is displayed.

AMF Configuration Dialog

You will note from the instructions on this page that the physical instances representing the objects in our model can be created manually or by using wizards. Using the wizards will save us both typing and time so we will use these instead of creating each instance manually.

Creating Node Instances

First we will create actual instances of the Node Types (in our case only one Node Type...SCNode) we created in our model.

Double-click AMF Configuration in the left hand pane. The Node Instance List appears.
Click on Node Instance List. The right hand pane displays the fields we must fill out to create our node instance.

In the right hand pane:

Select SCNode for the Node Type.
Select SysBlade for the Blade type.
Enter 1 for the Node Count.

The complete form should look like the following.

Node Wizard Details

Click the Create Instance Tree button to create our node instance.

Expanding the Node Instance List branch of the AMF Configuration tree in the left-hand pane reveals a new node instance named SCNodeI0 (indicating SCNode Instance 0).

Creating Service Group Instances

Now we will create actual instances of the Service Groups that we defined in our model.

Click on Service Group List. The right hand pane displays the fields we must fill out to create our service group instance.

In the right hand pane:

Select csa101SG (the only service group type we defined) for the Service Group Type.
- The Associated Node Instances list will be populated with all of the node instances that can be associated with the selected service group type.
Select SCNodeI0 from the Associated Node Instances list.

The completed form should look like the following.

Service Group Wizard Details

Click the Create Instance Tree button to create our service group instance.

If you now completely expand the AMF Configuration branch of the tree in the left-hand pane you will see the following.

AMF Configuration Instance Details

Notice that not only have the wizards created the node and service group instances for you, they have also filled out the entire instance tree. This was accomplished based on two key sets of information. The first of these is the association that was made between the service group type and the node instance in the Service Group Wizard. The second set of information is the component model that we created through the New Project Wizard and the Component Editor.

For more information regarding the specific properties of the generated instances see Appendix B: AMF Configuration Instance Details.

Thats it. We are done modelling the csa101 example!

Click the OK button to commit our changes and close the dialog.

Now its time to generate the framework code.

Generating the csa101 Code

In this step we generate the source code for our example. The code that will be created is the framework code that handles all of the low level functionality provided by SAFplus Platform.

To generate the source code go to the Project menu and select Generate Source. Several progress dialogs will appear and after a few seconds code generation will be complete.

The source code and configuration XML files are generated and placed in subdirectories of the Project Area Location that we specified in the New Project Wizard. You can review this location by using the Project > Properties menu to get to the Project Properties dialog and then selecting Clovis System Project in the left hand pane.

You can review the generated code from within the SAFplus Platform IDE. To do this go to the Clovis Workspace pane and expand the SampleModel node. The node tree should look like the following.

Clovis Workspace Code Tree

The code of particular interest to our example is in the SampleModel/src/app/csa101 branch of the tree. This is the code for our csa101 example. The csa101 example consists of two C modules (clCompAppMain.c and clCompCfg.c) and two header files. There is also a make file that will be used for building the application. The clCompAppMain.c file implements our 'Hello World!' application.

If you run code generation a second time you will be presented with a dialog box asking if you would like to make a backup copy of the existing source code before proceeding. You can answer No to this dialog.

Customizing the csa101 Code

While the code that was generated in the previous section can be built and run we want to make some changes to it so that we can easily see what our example is doing. For our example we will be changing one source file (clCompAppMain.c) and two make files.
In a real production situation this is the point where you would customize the code to perform the specific tasks of your product.

You will notice in the C file that there are several places where you see the following comment block.

clCompAppMain.c
`/* ---BEGIN_APPLICATION_CODE--- / // ... / ---END_APPLICATION_CODE--- */`

Makefiles have a similar convention but with a slightly different syntax.

Makefile
`# ---BEGIN_APPLICATION_CODE--- # ---END_APPLICATION_CODE---`

These are sections of the file where it is safe to enter custom application code without having to worry about that code being overwritten if you were to again perform Generate Source for your model. This is important since the typical development cycle is an iterative process where you will return to the IDE to make modifications to your model.

To simplify the process of building and running the csa101 example, OpenClovis, Inc. has already made the necessary code customizations and shipped this code with the SAFplus Platform SDK. At this point you can simply replace the generated source files with these customized versions to avoid typing in the changes. We will go over each customization below and explain what was done.

To replace the generated files with the customized versions shipped with the SAFplus Platform SDK follow these instructions.
The sample applications containing the csa101 example can be found under the installation directory at <install_dir>/sdk-5.0/src/examples/eval. We will refer to this directory in the remaining of this section as <eval_dir>.

Exit the SAFplus Platform IDE using the File > Exit menu item. If you are prompted to save changes before exiting answer yes.

Navigate to the source code work area. # cd /home/clovis/projectarea1/ide_workspace/SampleModel/src/app

Using your favorite editor open the file Makefile that resides in this directory. This is the application make file.
Add the following line to this file within the first BEGIN_APPLICATION_CODE and END_APPLICATION_CODE comment block. This will instruct the build process to build our custom output library. SUBDIRS += ev
Save this file and exit the editor.
Execute the following command to copy the output package to our working area. # cp -r <eval_dir>/src/app/ev .
Navigate to the component code work area. # cd csa101
Execute the following command to copy the csa101 source code. # cp <eval_dir>/src/app/csa101/clCompAppMain.c .
Execute the following command to copy the component make file. # cp <eval_dir>/src/app/csa101/Makefile .
Restart the SAFplus Platform IDE. # cl-ide

Customizing clCompAppMain.c

The clCompAppMain.c file is the C module which will implement our 'Hello World!' behavior. We have to make changes in several parts of this file.
If you copied the files as instructed in the section above then these changes have already been made to the files. Use this section to review and understand the changes.

In the include section of this file we have added a new include for ev.h. This refers to a special output library that we copied to our work area in the previous section. This output library is used to redirect output from the application to a component specific log. This is purely cosmetic but it will allow us to easily monitor what is happening when we run our example. (The following code begins at line 44 of the source file.)
clCompAppMain.c
/* ---BEGIN_APPLICATION_CODE--- */ #include "clCompAppMain.h" #include "../ev/ev.h" /* ---END_APPLICATION_CODE--- */

Next we define a couple of static variables that will keep track of the state of our application and a function to aid in showing when the application is running. (The following code begins at line 79 of the source file.)

clCompAppMain.c

 /*
   ---BEGIN_APPLICATION_CODE---
 */

 static int running = 0;
 static int exiting = 0;

 static char*
 show_progress(void)
 {
     static char bar[] = "          .";
     static int progress = 0;

     /* Show a little progress bar */
     return &bar[sizeof(bar)-2-(progress++)%(sizeof(bar)-2)];
 }

 /*
   ---END_APPLICATION_CODE---
 */

The running flag will be used to indicate whether the current application is active or suspended while exiting is a flag that indicates that the main() function returns, causing the exit of the application.

The function show_progress returns a pointer to a c string with a number of spaces followed by a '.' character. The number of spaces in the string cycles from zero to an upper bound. This is used later on to provide visual indication of the progress of the application's output.

Next we have added a function hello_func to print the output. (The following code begins at line 118 of the source file.)

clCompAppMain.c
`void hello_func(void unused) { while (!exiting) { if (running) { clprintf(CL_LOG_SEV_INFO, "csa101: Hello World! %s\n", show_progress()); } sleep(1); } return NULL; }`

Notice the while loop condition. This function uses the exiting variable that was initialized to 0. The loop will keep running until exiting is set to non-zero. The if condition within the while loop checks the value of the running variable. The work of the application: printing "Hello World!" along with the progress indicator will only be done when the running variable is set non-zero. Next the command sleep(1) simply sleeps for a second so as not to fill log files too quickly or completely swamp the CPU.

When exiting becomes non-zero, we return from the function.

Next we have added a function to initialize the special output library mentioned earlier (which is at line 245 in the source file).

Next we create a thread and call the function hello_func in the new thread context. (The following code begins at line 252 of the source file.)

clCompAppMain.c

/*  
 * ---BEGIN_APPLICATION_CODE---
 */
clprintf(CL_LOG_SEV_INFO, "csa101: Instantiated as component instance %s.\n", appName.value);

clprintf(CL_LOG_SEV_INFO, "%s: Waiting for CSI assignment...\n", appName.value);

rc = clOsalTaskCreateDetached("hello_thread", CL_OSAL_SCHED_OTHER, CL_OSAL_THREAD_PRI_NOT_APPLICABLE, 0, hello_func, NULL);
CL_ASSERT(rc == CL_OK);

/*  
 * ---END_APPLICATION_CODE---
 */

Next we indicate to our app when we are exiting. (The following code begins at line 284 of the source file.)
clCompAppMain.c
/* * ---BEGIN_APPLICATION_CODE--- */ exiting = 1; clEvalAppLogStreamClose(gEvalLogStream); /* * ---END_APPLICATION_CODE--- */
We set the exiting variable to 1. This will cause the loop in our hello_func function to exit.

Next we will put in code to manage the state of our application. (The following code begins at line 453 of the source file.)

clCompAppMain.c

void clCompAppAMFCSISet(SaInvocationT       invocation,
                        const SaNameT       *compName,
                        SaAmfHAStateT       haState,
                        SaAmfCSIDescriptorT csiDescriptor)
{
    /*
     * ---BEGIN_APPLICATION_CODE--- 
     */

    // ...

    /*
     * ---END_APPLICATION_CODE---
     */

    /*
     * Print information about the CSI Set
     */

    clprintf (CL_LOG_SEV_INFO, "Component [%.*s] : PID [%d]. CSI Set Received\n",
              compName->length, compName->value, mypid);

    clCompAppAMFPrintCSI(csiDescriptor, haState);

    /*
     * Take appropriate action based on state
     */

    switch ( haState )
    {
        case SA_AMF_HA_ACTIVE:
        {
            /*
             * AMF has requested application to take the active HA state 
             * for the CSI.
             */

            /*
             * ---BEGIN_APPLICATION_CODE---
             */

            clprintf(CL_LOG_SEV_INFO, "csa101: ACTIVE state requested; activating service\n");
            running = 1;

            /*
             * ---END_APPLICATION_CODE---
             */

            saAmfResponse(amfHandle, invocation, SA_AIS_OK);
            break;
        }

clCompAppMain.c


        case SA_AMF_HA_STANDBY:
        {
            /*
             * AMF has requested application to take the standby HA state 
             * for this CSI.
             */

            /*
             * ---BEGIN_APPLICATION_CODE---
             */

            clprintf(CL_LOG_SEV_INFO, "csa101: New state is not the ACTIVE; deactivating service\n");
            running = 0;

            /*
             * ---END_APPLICATION_CODE---
             */

            saAmfResponse(amfHandle, invocation, SA_AIS_OK);
            break;
        }

        case SA_AMF_HA_QUIESCED:
        {
            /*
             * AMF has requested application to quiesce the CSI currently
             * assigned the active or quiescing HA state. The application 
             * must stop work associated with the CSI immediately.
             */

            /*
             * ---BEGIN_APPLICATION_CODE---
             */
            clprintf(CL_LOG_SEV_INFO, "csa101: Acknowledging new state\n");
            running = 0;

            /*
             * ---END_APPLICATION_CODE---
             */

            saAmfResponse(amfHandle, invocation, SA_AIS_OK);
            break;
        }

clCompAppMain.c

        case SA_AMF_HA_QUIESCING:
        {
            /*
             * AMF has requested application to quiesce the CSI currently
             * assigned the active HA state. The application must stop work
             * associated with the CSI gracefully and not accept any new
             * workloads while the work is being terminated.
             */

            /*
             * ---BEGIN_APPLICATION_CODE---
             */
            clprintf(CL_LOG_SEV_INFO, "csa101: Signaling completion of QUIESCING\n");
            running = 0;

            /*
             * ---END_APPLICATION_CODE---
             */

            saAmfCSIQuiescingComplete(amfHandle, invocation, SA_AIS_OK);
            break;
        }

We have modified the clCompAppAMFCSISet callback function to let our application know what to do when the state changes. In the case where the state changes to SA_AMF_HA_ACTIVE we set the running variable to 1. This will cause our application to begin printing the 'Hello World!' message. For any other state change we set the running variable to 0 which will cause the message to stop printing. For any state change we print out a message indicating the new state of the application.

The last change that we make is to indicate to our application when the component is being disassociated with the workflow. (The following code begins at line 588 of the source file.)

clCompAppMain.c

void clCompAppAMFCSIRemove(SaInvocationT  invocation,
                           const SaNameT  *compName,
                           const SaNameT  *csiName,
                           SaAmfCSIFlagsT csiFlags)
{
    ....

    /*  
     * Add application specific logic for removing the work for this CSI.
     */

    /*  
     * ---BEGIN_APPLICATION_CODE---
     */
    running = 0;

    /*
     * ---END_APPLICATION_CODE---
     */

    saAmfResponse(amfHandle, invocation, SA_AIS_OK);

    return;
}

In the clCompAppAMFCSIRemove callback function we indicate to our application that we are no longer running so that the while loop in the hello_func function stops printing our 'Hello World!' message.

Customizing the Component MakeFile

We have to make a small change to the component MakeFile so that it knows about our special output library during the build. To do this we add the following lines. This file is located in /home/clovis/projectarea1/ide_workspace/SampleModel/src/app

Component MakeFile
`# ---BEGIN_APPLICATION_CODE--- SUBDIRS += ev # ---END_APPLICATION_CODE---`

Customizing the Application MakeFile

We have to make sure that our special output library is built along with our application. To do this we change the line listing the sudirectories to make as follows. This file is located in the directory /home/clovis/projectarea1/ide_workspace/SampleModel/src/app/csa101.

Application MakeFile
`# ---BEGIN_APPLICATION_CODE--- ... # Library added for demo console handling for the evaluation kit ASP_LIBS += libeval.a # ---END_APPLICATION_CODE---`

We are finished customizing our application code!

Building the csa101 Code

Now that we have finished customizing the code it is time to build it. The build process is launched using the Project > Build Project menu item. Once selected the Build Configuration dialog appears.

Build Configuration Details

The Build Configuration dialog is used to gather specific information about the build we are about to perform. Using this dialog you can rebuild the same model using different cross builds, or including different chassis managers. We don't have to make any changes to this dialog since the default settings make sense for our sample application.

If you have prebuilt the SAFplus Platform libraries then you can check the Use pre built SAFplus checkbox and include the location of the prebuilt libraries. For more information about pre-building SAFplus Platform libraries, see SAFplus Platform SDK User Guide.

The Include SNMP for North Bound Access control is checked by default. This just means that Net SNMP will be started along with our system. If you want end-to-end connectivity you will need to supply an SNMP Sub Agent and a MIB. See the SAFplus Platform SDK User Guide for more details.

In the Project menu if the Build Project entry is not highlighted, then click in the right pane i.e. Clovis Workspace pane and click the Project menu again. This not highlighting of the Build Project is because the Clovis Workspace is not selected properly because of moving focus to some other pane.

Click the OK button to begin the build. If this is the first time that the project is being built, or if you have made changes to any setting on this screen, you will initially see a progress dialog indicating that the project is being configured. The configuration step is setting up the project for building. After the configuration has completed you will see a progress dialog indicating that the code is being built.

Creating the csa101 Images

Making the csa101 images will create software packages that can be deployed on target machines to run the example. The process of creating images is launched using the Project > Make Images menu item. Once selected the Make Images Configuration dialog appears.

Make Images Configuration Details

The Make Images Configuration dialog is used to indicate information about the environment on which the images will be deployed. This information is used to tailor the images to run on that environment. Here we will make the following modificaiton.

Enter a value for the Trap IP. This value specifies where the SNMP sub-agent will send traps at runtime. This field is optional but if specified must be a valid IP address. Enter a value of '127.0.0.1' in this field.
Enter a value for the TIPC Net ID. This value represents a unique identifier used by TIPC to set up interprocess communication across the deployed OpenClovis SAFplus Platform cluster. This field is required and should default to '1340'.
Check the Create Node Specific Images and Package Images into Tarballs check boxes. This will create tarballs of the images making them easy to deploy to various machines.
The table on this dialog will hold a row for each node instance defined in the model. In our case this is only one...SCNodeI0. For each of these instances we can define the slot number in the chassis on which the node will run and the network interface that the node will use for communication. In our case enter '1' for the Slot Number and 'eth0' for the Network Interface.
Click OK to begin the make image process. A dialog box will appear and after a few seconds the the make images process will be complete.

The images will be populated at <project_area>/target/SampleModel/images. Each node-specific image is provided as a directory containing the run-time files (binaries, libraries, prerequisites, and configuration files) as well as a tarball with the same content. e.g. For our model containing one node (SCNodeI0) the following files and directories are generated for deployment on the run-time system.

<project_area>
   |+target
       |+<model>
           |+images
               |+SCNodeI0
               |   |+bin
               |   |+etc
               |   |+lib
               |   |+modules
               |   |+share
               |-SCNodeI0.tgz

The rest of the steps in this example are all done from the command line so we can exit the IDE. To do this use the File > Exit menu item.

Deploying the csa101 Images

Now that the image has been built we must deploy it so that we can run and observe our example. Since we are assuming that the example will be run on the same machine as the images were built this is a fairly trivial exercise. Use the following steps to deploy the runtime image.

First we create a directory where we will install the image. In our case we will use /root/asp. # cd /root # mkdir asp

Next we navigate to that directory and untar the deployment package.

# cd /root/asp
# tar xzvf /home/clovis/projectarea1/target/SampleModel/images/SCNodeI0.tgz

The System Controller is now installed and ready to run.

If you were going to run the example on a machine other than the one where the images were built you would first copy the installation tarball to that machine before performing the above steps.

Running the csa101 Example

There are two parts to running the csa101 example. First we must start SAFplus Platform, and then we interact with the system components.

Starting SAFplus Platform

To start SAFplus Platform on System Controller node.

Open a shell.
Run the following commands # cd /root/asp # etc/init.d/asp start

This assumes that you are running the SAFplus Platform example on the same PC that you are executing these commands. If you are running SAFplus Platform on a different machine then you should first ssh to that machine before executing the commands.

If SAFplus Platform fails to start properly it could be due to the machine's firewall being enabled. SAFplus Platform will not run on a machine which has firewall enabled. See the Environment Related Observation section of the SAFplus Platform Release Notes for more information.

By default the network interface used by the Group Membership Service is set to eth0. During the make images phase of the tutorial we also set the ethernet interface for node SCNodeI0 to be eth0. During image generation these configuration parameters are written to two files in the deployment package.

/root/asp/etc/clGmsConfig.xml
/root/asp/etc/asp.conf

There may be an occasion where you want to switch this interface for a machine on which you are deploying. If you would like to switch this interface on a machine without having to go through the process of rebuilding and redeploying, you can edit these two files and change the 'eth0' references to the interface you would like to use.

Interacting with the System Components

Once SAFplus Platform is up and running the next step is to start csa101 by informing SAFplus Platform that it should start the application. The Evaluation System's model tells SAFplus Platform that csa101 is locked for instantiation. This means that the process will not be started when SAFplus Platform comes up. This method of starting csa's is used for the Evaluation System, allowing users to interact with csa's and clearly see their output/functionality. Usually this would not be the case with applications, where they would run when SAFplus Platform begins.

At this point it would help to be familiar with the Service Availability Forum's notions of Service Unit, Service Group, and administrative state. The Service Availability Forum's Application Interface Specification (available from http://www.saforum.org/) is a good place to start.

In brief, the sample applications in the Evaluation System are part of service units which in turn are part of service groups. Service groups (and the service units that make up the service groups) can be in "administrative" states which include "LockInstantiation", "LockAssignment", and "Unlocked". There are other states, but these are the ones we care about for the purposes of this Evaluation System. If the administrative state of a service unit is "LockInstantiation" then the application that is part of that service unit will not even be started. If the administrative state is "LockAssignment" then the application will be started, but it will not be assigned any work. If the administrative state is "Unlocked" then it will not only be started, but will have a workload assigned to it, which is to say that it will start doing work (or start providing service), rather than idly sit waiting for work.

The administrative state of a service unit or service group can change from LockInstantiation to LockAssignment, from LockAssignment to Unlocked, or back to LockInstantiation, from Unlocked to LockAssignment. A picture might help here:

Partial Service Group Administrative State Diagram

As the figure shows, the administrative state of a service unit (or service group) can change from "LockInstantiation" to "LockAssignment" and from there to "Unlocked", or back to "LockInstantiation". One way to change the administrative state of a service group is with the SAFplus Platform Console command line interface.

To use the SAFplus Platform Console:

Open a terminal on the Development Machine. (Or ssh into System Controller node as root, if you are running SAFplus Platform on a machine other than the development machine.)
Change to image bin directory: # cd /root/asp/bin
Start the SAFplus Platform Console # ./asp_console
From within the SAFplus Platform Console: cli[Test]-> setc 1 cli[Test:SCNodeI0]-> setc cpm cli[Test:SCNodeI0:CPM]-> amsLockAssignment sg csa101SGI0
The above changes the administrative state of the group csa101SGI0 from "locked-for-instantiation" to "locked-for-assignment".
For the command cli[Test]-> setc 1, the 1 represents the physical slot number of the System Controller within the Chassis. Remember that we set our System Controller to be in slot 1 in the make images dialog.

Now lets tail the application log file so that we can see whats going on. In another window, as root, run:

# tail -f /root/asp/var/log/csa101I0Log.latest

You should see the following:

/root/asp/var/log/csa101I0Log.latest

Tue Jul 15 21:32:06 2008   (SCNodeI0.10849 : csa101_EO.---.---.00034 :   INFO)
 Component [csa101I0] : PID [10849]. Initializing

Tue Jul 15 21:32:06 2008   (SCNodeI0.10849 : csa101_EO.---.---.00035 :   INFO)
    IOC Address             : 0x1

Tue Jul 15 21:32:06 2008   (SCNodeI0.10849 : csa101_EO.---.---.00036 :   INFO)
    IOC Port                : 0x80

Tue Jul 15 21:32:06 2008   (SCNodeI0.10849 : csa101_EO.---.---.00037 :   INFO)
 csa101: Instantiated as component instance csa101I0.

Tue Jul 15 21:32:06 2008   (SCNodeI0.10849 : csa101_EO.---.---.00038 :   INFO)
 csa101I0: Waiting for CSI assignment...

Next change the administrative state of the csa101SGI0 service group to "unlocked" by running (in the SAFplus Platform Console) :

# cli[Test:SCNodeI0:CPM]-> amsUnlock sg csa101SGI0

In the window where you're running the "tail -f" you should see:

/root/asp/var/log/csa101I0Log.latest

Tue Jul 15 21:36:17 2008   (SCNodeI0.10849 : csa101_EO.---.---.00049 :   INFO)
 csa101: ACTIVE state requested; activating service

Tue Jul 15 21:36:18 2008   (SCNodeI0.10849 : csa101_EO.---.---.00050 :   INFO)
 csa101: Hello World! .

Tue Jul 15 21:36:19 2008   (SCNodeI0.10849 : csa101_EO.---.---.00051 :   INFO)
 csa101: Hello World!  .

Tue Jul 15 21:36:20 2008   (SCNodeI0.10849 : csa101_EO.---.---.00052 :   INFO)
 csa101: Hello World!   .

Tue Jul 15 21:36:21 2008   (SCNodeI0.10849 : csa101_EO.---.---.00053 :   INFO)
 csa101: Hello World!    .

Tue Jul 15 21:36:22 2008   (SCNodeI0.10849 : csa101_EO.---.---.00054 :   INFO)
 csa101: Hello World!     .

As you can tell from the output log our component is up and running! It is continuously printing our 'Hello World!' output.

Now change the state of the csa101SGI0 service group back to "locked-for-assignment" by running (in the SAFplus Platform Console):

# cli[Test:SCNodeI0:CPM]-> amsLockAssignment sg csa101SGI0

In the tail -f output you should see:

/root/asp/var/log/csa101I0Log.latest

Tue Jul 15 21:39:29 2008   (SCNodeI0.10849 : csa101_EO.---.---.00241 :   INFO)
 csa101: Hello World!  .

Tue Jul 15 21:39:30 2008   (SCNodeI0.10849 : csa101_EO.---.---.00242 :   INFO)
 Component [csa101I0] : PID [10849]. CSI Set Received

Tue Jul 15 21:39:30 2008   (SCNodeI0.10849 : csa101_EO.---.---.00243 :   INFO)
    CSI Flags               : [Target One]

Tue Jul 15 21:39:30 2008   (SCNodeI0.10849 : csa101_EO.---.---.00244 :   INFO)
    CSI Name                : [csa101CSII0]

Tue Jul 15 21:39:30 2008   (SCNodeI0.10849 : csa101_EO.---.---.00245 :   INFO)
    HA State                : [Quiesced]

Tue Jul 15 21:39:30 2008   (SCNodeI0.10849 : csa101_EO.---.---.00246 :   INFO)
 csa101: Acknowledging new state

Tue Jul 15 21:39:30 2008   (SCNodeI0.10849 : csa101_EO.---.---.00249 :   INFO)
 Component [csa101I0] : PID [10849]. CSI Remove Received

Tue Jul 15 21:39:30 2008   (SCNodeI0.10849 : csa101_EO.---.---.00250 :   INFO)
    CSI                     : csa101CSII0

Tue Jul 15 21:39:30 2008   (SCNodeI0.10849 : csa101_EO.---.---.00251 :   INFO)
    CSI Flags               : 0x2

Our component has been put into Lock Assignment state so our 'Hello World!' output has stopped printing to the log.

At this point you can either unlock the service group to change its state to "unlocked" or you can lock it for instantiation to change it to state "locked-for-instantiation". The latter will cause the csa101 process to die. From state "locked-for-assignment", it is possible to change the state to "locked-for-instantiation" by running (in the SAFplus Platform Console): cli[Test:SCNodeI0:CPM]-> amsLockInstantiation sg csa101SGI0 cli[Test:SCNodeI0:CPM] -> end cli[Test:SCNodeI0] -> end cli[Test] -> bye

Stopping SAFplus Platform

To stop SAFplus Platform on the System Controller

Open a shell.
ssh into the System Controller node as root.
Once logged in, run the following command # cd /root/asp # etc/init.d/asp stop

Summary and Next Steps

In the csa101 example we learned the following.

How to create a system model using the SAFplus Platform IDE.
How to generate the source code.
How to customize this source code to fit a specific application.
How to configure and build the customized source code.
How to make runtime images and deploy them to target machines.
How to start and stop SAFplus.
How to interact with system components using the SAFplus Platform Console.

The next logical step would be to run through the SAFplus Platform Evaluation System User Guide. This guide goes over more complex system configurations and introduces new concepts.

For more in depth information on the SAFplus Platform IDE see the SAFplus Platform IDE User Guide.

For more in depth information on the SAFplus Platform SDK see the SAFplus Platform SDK User Guide.

Appendix A: target.conf Settings

Below is a description of the values in the settings in the target.conf file.

TRAP_IP (Mandatory): Specifies where the SNMP SubAgent should send traps at runtime. If you do not have an SNMP SubAgent in your model specify 127.0.0.1 as the value. e.g.: TRAP_IP=127.0.0.1
CMM_IP (Mandatory if deployed on an ATCA chassis): Specifies the IP address of the target system's chassis management module or shelf manager. ATCA chassis Example: CMM_IP=169.254.1.2
CMM_USERNAME and CMM_PASSWORD (Mandatory if deployed on an ATCA chassis): Specifies the username and password required for the OpenClovis SAFplus Platform Chassis Manager to connect to the target system's chassis management module. e.g.: CMM_USERNAME=root CMM_PASSWORD=password
INSTALL_PREREQUISITES=YES|NO (Mandatory): Specifies whether the target images will include 3rd party runtime prerequisites or not. Say YES if the target nodes do not meet the target host requirements specified in the Installation section of this document. e.g.: INSTALL_PREREQUISITES=YES
INSTANTIATE_IMAGES=YES|NO (Mandatory): Specifies whether make images will generate node-instance specific images instead of only generating node-type specific images. This option is a development optimization for advanced users of SAFplus Platform SDK. If unsure, say YES. e.g.: INSTANTIATE_IMAGES=YES
CREATE_TARBALLS=YES|NO (Mandatory): Specifies whether the node-instance specific images created will be packaged into tarballs for deployment onto the target system. If unsure, say YES. e.g.: CREATE_TARBALLS=YES
TIPC_NETID (Mandatory): Specifies a unique identifier used by TIPC to set up interprocess communication across the deployed OpenClovis SAFplus Platform cluster. This is an unsigned 32-bit integer, and must be unique for every model that is deployed. e.g.: TIPC_NETID=1337

Node Instance Details: These specify the node-instance specific parameters required for deploying the model. For each node in the model there is a corresponding entry in the file:

SLOT_<node instance name> (Mandatory): Specifies which slot the node is located in. The first slot is slot 1 -- DO NOT USE SLOT NUMBER 0, it is invalid. When deployed to an ATCA chassis, the physical slot in which the blade is actually installed will override this value. When deployed to regular (non-ATCA) systems, this is a logical slot and must be unique for every node in the cluster. e.g.: SLOT_SCNodeI0=1
LINK_<node instance name> (Optional): Specifies the ethernet interface used by the node for OpenClovis SAFplus Platform communication with the rest of the cluster. If unspecified, this defaults to eth0. e.g.: LINK_SCNodeI0=eth0
ARCH_<node instance name> (Optional if ARCH is specified): Specifies the target architecture of the node as a combination of machine architecture (MACH) and linux kernel version. This is only required on a per-node basis if the target cluster has heterogeneous architectures across the nodes. If it is a homogeneous cluster, a single ARCH parameter (described below) will suffice. e.g.: ARCH_SCNodeI0=i386/linux-2.6.14
ARCH (Optional if node-specific ARCH_ parameters are specified): Specifies the target architecture of all nodes in a homogeneous cluster as a combination of machine architecture (MACH) and linux kernel version. Note: The build process automatically populates this variable based on the last target the model is built for.e.g.: ARCH=i386/linux-2.6.14

For example, if we have a three-node cluster with the following details:

**Example Node Instance Detail**
Node Name	Slot Number	Link Interface	Architecture
SCNodeI0	1	eth0	i386/linux-2.6.14
PayloadNodeI0	3	eth0	i386/linux-2.6.14
PayloadNodeI1	4	eth1	ppc/linux-2.6.9

we would specify the node instance details as:

SLOT_SCNodeI0=1
SLOT_PayloadNodeI0=3
SLOT_PayloadNodeI1=4

LINK_SCNodeI0=eth0
LINK_PayloadNodeI0=eth0
LINK_PayloadNodeI1=eth1

ARCH_SCNodeI0=i386/linux-2.6.14
ARCH_PayloadNodeI0=i386/linux-2.6.14
ARCH_PayloadNodeI1=ppc/linux-2.6.9

Appendix B: AMF Configuration Details

This appendix gives brief descriptions of configuration details for instances of different entities (like Node, Service Group, Service Unit etc) that are present in the Clovis -> AMF Configuration dialog box.

Node Instance

This screen displays the node instance that was created by the Node Instance Wizard. This node instance was created because the node type SCNode was selected on the wizard screen.

Node Instance Details

The information on this screen is described below.

Node Instance Name: This field holds the name of the node instance. This name must be unique. The name that was generated combines the node type (SCNode), the letter I (for Instance), and the number 0 (since this is the first instance of this type).
Node Type: This field holds the node type that was selected on the wizard screen.
MOID: This is the unique identifier for the node instance. It was generated by the wizard. The format of this ID is a string representing the one and only instance of the chassis (\Chassis:0) defined in the Resource Editor followed by a string representing the first and only instance of the blade type (\SysBlade:0) that was selected in the Node Instance Wizard.
MOID is an acronym for Managed Object Identifier. It must be unique and is used to identify which hardware chassis and blade type this instance will run on.

Service Unit Instance

This screen displays the service unit instance that was created by the Service Group Instance Wizard. This service unit instance was created because the service unit type is associated with both the selected node type (SCNode) and the selected service group type (csa101SG) in our model.

SU Instance Details

The information on this screen is described below.

SU Instance Name: This field holds the name of the service unit instance. This name must be unique. The name that was generated combines the service unit type (csa101SU), the letter I (for Instance), and the number 0 (since this is the first instance of this type).
Service Unit Type: This field holds the type of the service unit instance.

Component Instance

This screen displays the component instance that was created by the Service Group Instance Wizard. This component instance was created because the component type is associated with the created parent service unit type (csa101SU) in our model.

Component Instance Details

The information on this screen is described below.

Component Instance Name: This field holds the name of the component instance. This name must be unique. The name that was generated combines the component type (csa101), the letter I (for Instance), and the number 0 (since this is the first instance of this type).
Component Type: This field holds the type of the component instance.

Service Group Instance

This screen displays the service group instance that was created by the Service Group Instance Wizard. This service group instance was created because the service group type csa101SG was selected on the wizard screen.

Service Group Instance Details

The information on this screen is described below.

SG Instance Name: This field holds the name of the service group instance. This name must be unique. The name that was generated combines the service group type (csa101SG), the letter I (for Instance), and the number 0 (since this is the first instance of this type).
ServiceGroup Type: This field holds the type of the service group instance.
Associated Service Units: This button is used to associate service unit instances with this service group instance. Creating this association indicates that the selected service unit(s) will run within this service group instance.

Clicking the Associated Service Units Edit... button will display the following dialog.

Associated Service Units Dialog

This dialog lists the service unit instances that can be associated with this service group instance. The list contains only one item, the service unit instance that was created by the wizard. This item is checked indicating that the wizard automatically chose this service unit instance to run within the service group instance.

Service Instance Instance

This screen displays the service instance that was created by the Service Group Instance Wizard. This service instance was created because the service instance type is associated with the parent service group type (csa101SG) in our model.

Service Instance Details

The information on this screen is described below.

Service Instance Name: This field holds the name of the service instance. This name must be unique. The name that was generated combines the service instance type (csa101SI), the letter I (for Instance), and the number 0 (since this is the first instance of this type).
ServiceInstance Type: This field holds the type of the service instance.

Component Service Instance Instance

This screen displays the component service instance that was created by the Service Group Instance Wizard. This component service instance was created because the component service instance is associated with the parent service instance type (csa101SI) in our model.

Component Service Instance Details

The information on this screen is described below.

Component Service Instance Name: This field holds the name of the component service instance. This name must be unique. The name that was generated combines the component service instance type (csa101CSI), the letter I (for Instance), and the number 0 (since this is the first instance of this type).
ComponentServiceInstance Type: This field holds the type of the component service instance.

@@ Line 448: / Line 448: @@
 <code><pre># cd /home/clovis/projectarea1/ide_workspace/SampleModel/src/app</pre></code>
 <li>Using your favorite editor open the file <code>Makefile</code> that resides in this directory. This is the application make file.
-<li>Add the following line to this file within the first <code>BEGIN_APPLICATION_CODE</code> and <code>END_APPLICATION_CODE</code> comment block.
+<li>Add the following line to this file within the first <code>BEGIN_APPLICATION_CODE</code> and <code>END_APPLICATION_CODE</code> comment block.  This will instruct the build process to build our custom output library.
 <code><pre>SUBDIRS += ev</pre></code>
-This will instruct the build process to build our custom output library.
 <li>Save this file and exit the editor.
 <li>Execute the following command to copy the output package to our working area.

Difference between revisions of "Doc:latest/tutorial"

Revision as of 18:07, 23 January 2013

Contents

Preface

Audience

Documentation Conventions

Related Documents

OpenClovis Online Technical Support

Documentation Feedback

Our Example: The csa101 System

Creating the csa101 Model

Creating a New Project Area

Launching the SAFplus Platform IDE

Creating the Sample Project

Viewing the Model

The SAFplus Platform IDE Perspective

Resource Editor View

Component Editor View

Configuring the Components

Configuring the Service Group

Configuring the Service Instance

Configuring the SAF Component

Configuring Physical Instances

Creating Node Instances

Creating Service Group Instances

Generating the csa101 Code

Customizing the csa101 Code

Customizing clCompAppMain.c

Customizing the Component MakeFile

Customizing the Application MakeFile

Building the csa101 Code

Creating the csa101 Images

Deploying the csa101 Images

Running the csa101 Example

Starting SAFplus Platform

Interacting with the System Components

Stopping SAFplus Platform

Summary and Next Steps

Appendix A: target.conf Settings

Appendix B: AMF Configuration Details

Node Instance

Service Unit Instance

Component Instance

Service Group Instance

Service Instance Instance

Component Service Instance Instance

Search

Personal tools